The Fluke 481 Radiation Detection Meter is a portable and practical means for discovering irradiated goods, and for helping remediate contaminant and safety issues while minimally affecting performances. Ideal for detecting irradiated goods, equipment, surfaces or environments in industrial settings, the 481 Radiation Meter helps ascertain worker safety and compliance to federal regulations.
Use of the Fluke 481 assures employees that radiation dangers are known, monitored and calculated for their security. Whenever radiation is found, a clear and quantifiable result provides handlers to comply with federal guidelines while avoiding unnecessary steps that could stop procedures, impact productivity or lead to missed revenue.
| General specifications | |
| Radiation detected | Beta > 100 keV Gamma > 7 keV |
| Operating ranges | 0 mR/h to 5 mR/h (8 sec) 0 mR/h to 50 mR/h (2.5 sec) 0 mR/h to 500 mR/h (2 sec) 0 R/h to 5 R/h (2 sec) 0 R/h to 50 R/h (2 sec) |
| Accuracy | Within 10 % of readings between 10 % and 100 % of full scale indication on any range, exclusive of energy response |
| Detector | Chamber (cc volume air ionization) 349 cc Chamber wall (phenolic) 246 mg/cm2 Chamber window (mylar) 6.6 mg/cm2 Beta slide 440 mg/cm2 |
| Automatic features | Auto-zeroing, auto-ranging, and auto-backlight |
| Power requirements | Two 9 V alkaline, 200 hours operation |
| Warm-up time | One minute |
| Battery life | Four+ hours continuous use per battery pack (assumes 50 % brightness of LCD) |
| Dimensions (W x D x H) | 10 cm x 20 cm x 15 cm (4 in x 8 in x 6 in) |
| Weight | 1.11 kg (2.5 lb) |
| Display LCD analog/digital with backlight | |
| Analog | 100 element bar graph 6.4 cm long. Bar graph is divided into 5 major segments, each labeled with the appropriate value for the range of the instrument |
| Digital | 2.5 digit display is followed by a significant zero digit depending on the operating range of the instrument. The units of measurement are indicated on the display at all times. Digits are 6.4 mm (0.25 in) high. Low battery and freeze indicators are also provided on the display |
| Modes | |
| Integrate mode | Operates continuously 30 seconds after the instrument has been turned on. Integration is performed even if the instrument is displaying in mR/h or R/h |
| Freeze mode | Will place a tick mark on the bar graph display to hold on the peak displayed value. The unit will continue to read and display current radiation values |
| Environmental | |
| Temperature range | -4 °F to 122 °F |
| Relative humidity | 0 % to 100 % (at 140 °F) |
| Geotropism | < 1 % |
| 型号名称 | 描述 |
| FLUKE-481 | 481 Ion Chamber Survey Meter |
| FLUKE-481-DESI | 481-DESI Ion Chamber Survey Meter, dose equivalent SI |
| 190HPS |
单件仪器携带包 |
| 450UCS | Check Source, 238Uranium, 0.064 µCi, impregnated 2 in x 2 in yellow card |
技术咨询
